<% const { master, details } = section; %>

1. Calibration using standard weights :

Tolerance: +/- Least count of the balance OR +/- 0.1 % of Standard weight whichever is higher and value should be rounded off on lower side as per display capacity of balance.

<% details.forEach((w, i) => { %> <% }) %>
Standard weights for calibration (<%- master.Periodic_Unit %>) Tolerance (<%- master.Periodic_Unit %>) Accuracy Limits (Std wt +/- Tolerance) (<%- master.Periodic_Unit %>)
<% if (i == 0) {%> 20e <% } else if (i == 1) { %> 20% of a <% } else if (i == 2) { %> 50% of a <% } else if (i == 3) { %> 80% of a <% } %> <%= w.Periodic_BalStdWt %> <%= details[i]?.Periodic_Tolerance || ''%> <%= w.Periodic_BalNegTol %> - <%= w.Periodic_BalPosTol %>
<% if(sectionIndex == 0){ %>

Note:

  1. Adjust zero error before commencing the weighing operation.
  2. Check against standard weights on every month.
<% } %> <% details.forEach((element, i) => { %> <% }); %>
Date Time Cleanliness (Clean / Unclean) Spirit Level (Ok / Not Ok) Zero Error Standard weights kept on the balance (<%- master.Periodic_Unit %>) Readings shown (<%- master.Periodic_Unit %>) Done by
<%- i == 0 ? moment(bmaster.Periodic_CalbDate).format(date_Format) : '' %> <%= i == 0 ? confi_tbl.TimeFormat === 'HH:mm' ? master.Periodic_CalbTime.slice(0, 5) : confi_tbl.TimeFormat === 'HH:mm:ss' ? master.Periodic_CalbTime.slice(0, 8) : master.Periodic_CalbTime : ''%> <%- i == 0 ? master.Periodic_GeneralCare == 0 ? 'Clean' : '' : '' %> <%- i == 0 ? master.Periodic_SpritLevel == 0 ? 'OK': '' : '' %> <%- i == 0 ? master.Periodic_ZeroError == 0 ? 'No Zero Error' : '' : '' %> <% if (i == 0) {%> 20e <% } else if (i == 1) { %> 20% of a <% } else if (i == 2) { %> 50% of a <% } else if (i == 3) { %> 80% of a <% } %> <%- element.Periodic_BalStdWt %> <%- element.Periodic_ActualWt %> <%- master.Periodic_UserName %>